Fulton 666 4 Way Pressure Clamp 2 each

Clamping panels doesn't have to be difficult. This clamp system is designed for the sole purpose of clamping panels using pressure from the top, bottom and sides all at the same time!

4 Way Pressure Clamp
Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don’t do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.

Clamping Pressure on ALL 4 SIDES
When clamping panels, the challenge is preventing the middle boards from bowing or popping out of place. There are many clamps and clamping systems that can help reduce this problem or get close to applying pressure where needed. Some of those systems cost a lot of money as well. Our simple, easy to use 4 way pressure clamp system will apply pressure where its needed and it will do it for a fraction of the cost.

Clamp Various Size Panels
From small to larger panel glue ups, the 4 Way Pressure Clamp has got you covered.

Build it to Your Specs
You can build the 4 Way Pressure Clamp to your specs. Typically the most common lengths are 24", 36" or 48" depending on what style of projects you do most often.

Solid Steel
From the steel rotating clamp handle to the steel clamp assemblies, you'll get a ton of mileage out of these durable clamps.

Heavy Duty Notched Bars
Made from a durable composite resin material, the notched bars are perfect for holding the steel clamping assemblies in place for optimal clamping pressure from all 4 sides.

Always Plan Ahead...
Before deciding how many clamps you need, use the general rule of thumb and plan for using a clamp at 12" intervals. This helps provide enough clamping pressure throughout your workpiece to prevent bowing of your panels. When deciding what size panel you want to glue up, make sure you have enough 4 way pressure clamps to do the job. We recommend that you set your 4 way pressure clamps at 12” intervals. This helps keep even pressure throughout the panel. The 4 way pressure clamp can also be used in conjunction with pipe or bar clamps to help provide even clamping pressure that pipe or bar clamps typically can not on there own.